WRX Trade Primer

WRX Logo | uPVC Spray Paint | Radiator Spray Paint | univarSC.com SKU: 610902135

Size: 2.5L
Price:
Sale price£15.00Inc VAT (£12.50 Exc VAT)
Stock:

Description

WRX Trade Primer is a water-based, acrylic emulsion, silicone interior primer that can be applied to any interior surface that is ready to be primed. Using WRX Trade primer ensures good paint adhesion and helps to prevent flaking or peeling.

Preparation

For best results, make sure the surfaces to be painted are sound, clean and dry. Remove any loose or flaking material. Repair damaged areas. Glossy surfaces should be sanded down to provide a key. Wear a suitable mask if dry sanding. Avoid the inhalation of dust Special precautions should be taken during surface preparation of pre-1960s paint surfaces as they may contain harmful lead.

Specifications

It penetrates the surfaces deeply and creates solid surfaces onto which the paint can hold on. It reduces topcoat paint consumption by saturating the raw surfaces as it is reinforced. It does not prevent the wall from breathing, thanks to the porous composition. It has a high vapour permeability. It penetrates and reinforces the surface. It prevents premature drying. It eliminates colour ripples that are likely to occur in topcoat paint on surfaces with a different absorbing capacity. It has a high covering power, thus reduces the paint consumption and labour in colour conversion for previously painted surfaces. Particularly, it prevents different textures formed on repaired surfaces, from being seen on the topcoat paint. It eliminates colour ripples caused by any difference in the texture. It allows the new water-based paint to adhere to the old solvent-based paint layer.

Application

Do not apply in damp or humid conditions or room temperatures below 10°C. Stir well before use. Ready to use. It can be thinned with a maximum of 5% water if required. Suitable for application by brush or roller. For best results, load the brush generously. The primer should be applied in a single coat by following the shade.

Coverage

WRX Primer will cover approximately 23-35 square metres per litre depending on the surface.

Drying Time

Touch dry in an hour under normal conditions. Allow 6 hours between coats. Through dry is 24 hours.

After Painting

Remove as much paint as possible from brushes and rollers, before cleaning with warm soapy water. Do not empty paint into drains or watercourses. Some local authorities have special facilities for the disposal of waste paint. Replace lid firmly.

Storage

Store and move in dry conditions in a secure upright position. Protect from frost and extreme temperatures.

Health & Safety Information

Keep out of reach of children. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Avoid release to the environment. Inhalation: Remove to fresh air. In case of persistent complaints obtain medical attention. Ingestion: Do not induce vomiting. Immediately obtain medical attention. Skin contact: Remove contaminated clothing. Clean the skin with water, soap and special cleaning cream. Eye contact: Flush eye with copious quantities of water. If irritation occurs, obtain medical attention.

Contains mixture of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one (Cas No:55965-84-9). May produce an allergic reaction.

Low VOC.
Size 2.5L
Barcode 5060614972693
Product Type Paint
Brand WRX Trade
Warranty

Years

Delivery Information

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Maestro Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like