
Molykote™ G-9000 grease replaces Molykote™ 1292 0
In September 2018 Dow®, parent company of Molykote™ announced that Molykote™ 1292 was being discontinued. Although they have not given any specific reason for the product being discontinued Dow® have highlighted Molykote™ G-9000 as a replacement...- Steven Davidson
- Tags: Engineering Product News

Formaldehyde in cutting fluids. What you need to know. 0
The European Union has reclassified several formaldehyde-releasing agents (FRAs) such as methylenedimorpholine (MBM), oxazolidine (MBO) and hydroxypropylamine (HPT) as category 1B carcinogens. Previously, formaldehyde itself was classed as a carcinogen – but formaldehyde-releasing agents were not...- Steven Davidson
- Tags: Engineering News Product News

How to remove silicone Sealant 0
By far the best way to remove silicone sealant is when the product is still wet. Whilst it is still in its curing phase and before it has formed a skin, excess or incorrectly applied silicone is best removed just using a dry paper towel. Certain cloth cleaners can also be used but remember to use them dry...- Steven Davidson
- Tags: Engineering How To's

Why is gear oil viscosity important? 0
Viscosity is extremely important when selecting gear oils as it significantly determines the formation of a lubricant film. By increasing the viscosity of the lubricating oil this creates a thicker lubricant film which in turn improves the anti-wear and dampening properties as well as scuffing load capacity....- Steven Davidson
- Tags: Engineering Knowledge Base Lubricants